Billingham Mini Eventer Camera Bag - Sage FibreNyte / Black Leather
Development by DDSHOPAPPS
Billingham Mini Eventer Camera Bag - Sage FibreNyte / Black Leather
The newest addition to our camera bag range. Perfect for small-medium sized DSLRs or mirrorless cameras with a dedicated padded area for up to 11” tablets. Features weatherproof zips, a luggage trolley retainer strap and rear document pocket. Includes an SP50 Shoulder Pad, and removable padded insert with divider set. Made in England with three-layer waterproof fabric and real, top-grain leather
The flexible padded insert is made from dense, fabric covered 'closed cell' foam and provides impact protection on the front, back, base and sides. Like the bag itself, the insert is a little flexible.
Also included are two large vertical padded dividers and two smaller 'flap' dividers. You can use the vertical dividers to split the bag into columns and the flap dividers to stack gear within those columns. The exact arrangement that is possible for you will depend on the size of your gear.
The dual zips allow you to access only part of the bag if you don't want to open all of the main compartment up.
Once the leather softens, you should be able to open the bag one-handed whilst wearing the bag! The buckles allow you to fine tune the 'fit' of the front pockets. You don't need to use the buckles to open the bag.
There are only two differences between the Mini Eventer and Eventer MKII:
- The size: Mini Eventer is smaller, Eventer MKII is larger. The extra size allows a 14" MacBook Pro to be stored instead of an 11" iPad Pro, plus larger camera gear.
- Front straps: Mini Eventer has single, unstitched front straps and the Eventer MKII has dual, stitched front straps.
CRAFTMANSHIP
- Made of a three-layer waterproof material
- Real, full-grain, vegetable tanned leather
- Solid brass fixings
- Individual serial number
- Made of dense, closed-cell foam
- Five year manufacturers guarantee
- Made in England
Specifications
| Mini Eventer | |
| Colour | Sage FibreNyte / Black Leather |
| External dimensions | W360mm (14¼") x D160mm (6¼") x H250mm (9⅞") (excluding top handle) |
| W360mm (14¼") x D160mm (6¼") x H300mm (11¾") (including top handle) | |
| Capacity (main compartment - inside padded insert) | 5 litres (0.18 feet³) |
| Internal dimensions (with padded insert in) | W330mm (13") widest x D100mm (3⅞") x H210mm (8¼") |
| The insert (and the bag) can bow out to a 'D' measurement of about 120mm (4¾") at the centre of the bag to accommodate slightly larger gear. | |
| Capacity (main compartment - without padded insert) | 9 litres (0.32 feet³) |
| Internal dimensions (without padded insert) | W350mm widest (13¾") x D120mm (4¾") x H230mm (9⅛") |
| The available width (W) and height (H) reduces slightly at the corners to allow for the curves of the bag. | |
| Weight | 1.47 kg (3.24 lbs) |
| POCKETS | 3 in addition to the main compartment |
| FRONT DUMP POCKETS (X2) | |
| Internal dimensions (individual) | W140mm (5½")* x H160mm (6¼") |
| Width (W) available is less near the bottom of the pocket. | |
| Capacity (individual) | 0.75 litres (0.03 feet³) each |
| REAR ZIP POCKET | |
| Internal dimensions | W290mm (11⅜") x D Nominal x H170mm (6⅝") |
| Width (W) available is less near the bottom of the pocket. | |
| Tablet COMPARTMENT | |
| Internal dimensions | W290mm (10¼") x DNominal x 210mm (8¼") |
| Please note that the padded laptop slip does taper inwards slightly towards the top (above 140mm or 5½") to a width of approximately W260mm (10¼"). This is to ease inserting and removing a tablet past the zip of the main compartment. It will fit 9.7", 10.2", 10.5" and 11" iPads (including the 11" iPad Pro) and smaller devices. | |
| SHOULDER SLING | |
| Length | Can be adjusted between 820mm (32¼) and 1400mm (55⅛) approx. |
| Width | 50mm (2”) |
| Compatible with SP20 and SP50 (recommended) Shoulder Pads. An SP50 is included. | |
| LUGGAGE TROLLEY STRAP | |
| Internal dimensions | Luggage trolley strap will fit handles approximately 250mm (9⅞") wide - however if the top of the handle is slightly larger than this fitting will usually still be possible. |
| SP50 SHOULDER PAD (INCLUDED) | |
| External Dimensions | W80mm (3⅛") x D12mm (½") x L255mm (10") |
| 'D' measurement excludes fixings on top | |
| Weight | 0.09kg approx (0.2 lbs) |
| This figure has been included in the total weight of the bag listed above. | |
| WHAT DOES IT FIT? | |
|
Inside padded laptop compartment: Most small-to-medium sized computer tablets. For example iPad Minis, 9.7", 10.2", 10.5", 10.9" and 11" iPads, Samsung Galaxy Tab A8s (10.5") or Microsoft Surface Go Devices (10.5" Gen 1, 2 & 3). |
|
|
Almost any mirrorless camera without a battery grip (e.g. Nikon Z7 II, Canon R6 MK II, Sony A7 V, Sony α6700, Fujifilm X-T4, Fujifilm X-H2S etc) with a small-to-medium lens attached. Plus 2-3 lenses. |
|
|
Virtually any rangefinder style camera such as Leica M11, Leica M6, Fujifilm X-Pro 3 etc with several lenses. |
|
|
2-3 small fixed lens cameras such as Leica Q3, Sony RX100 VII and Fujifilm X100V. |
|
|
Small foldable drones such as the DJI Mini 3 Pro, DJI Air 2S and DJI Avata. |
|
Warranty
BILLINGHAM 5-YEAR MANUFACTURER WARRANTY
Billingham Bags come with a Manufacturer Warranty for a period of 10 Years from the date of purchase with the following terms and conditions.
- The Billingham Manufacturer Warranty covers material and manufacturing defects existing at the time of the purchase and during the first 5 Years.
- The Billingham Manufacturer Warranty only comes into force if a proof of purchase is presented during the warranty period, you will have the right to have any manufacturing defect repaired free of charge.
- The Billingham Manufacturer Warranty is ONLY applicable to Billingham Bags purchased from Authorised Dealers within Australia.
- The Billingham Manufacturer Warranty does not cover normal wear and tear or deterioration as well as scratches or breakages due to physical damage, water or fire damage, loss, or theft.
For warranty claims or inquires please contact:

A: Unit 5, 37 Charlotte Street, Campsie NSW 2194
P: +61 2 8599 2858
E: sales@kudoscameras.com.au
Aftercare
CLEANING AND CARE
Billingham bags are designed to grow old gracefully! Professional photographers usually prefer a well-worn, battle-scarred Billingham to a new clean version; however, you may wish to reduce the grime level on your Billingham so here are a few tips:
- Remove any padded inserts, dividers and the base foam.
- DON'T put your Billingham into a washing machine; the detergent will almost certainly ruin the leather.
- DON'T dry clean your Billingham.
- Place the bag on a draining board and wash the bag with warm soapy water, using a nail brush on stubborn areas of dirt (don't submerge the bag in the water).
- Wash all soap away with clear water and allow to dry naturally (airing cupboard) or at least without too much heat. Excessive heat might affect the Stormblock waterproofing or the leather. Also, DON'T put the bag in a tumble dryer or equivalent device.
- When the bag is dry carefully apply leather dressing to the binding and leather areas. We recommend Mars oil or Nikwax. Try not to mark the canvas when you are applying the dressing.
The canvas is tough, the dyestuff resistant and Billingham Stormblock waterproofing is incredible, but hard scrubbing might lighten the colour and excessive heat or exposure to acids (such as battery acid) might spoil the Stormblock so please go carefully!
PLEASE NOTE:
- When storing the bag, we would strongly recommend that you make sure the bag is dry first and is stored in a clean and dry place to prevent bad smells or mould developing. Storing it in a shed or garage is usually a bad idea.
- The cleaning instructions for removable padded inserts and dividers are the same as for the bags themselves above.
- We would especially recommend against petroleum-based shoe polishes for treating the leather as they can cause the leather to dry out over time.
